Tuesday, April 04, 2006
Springtime in Baton Rouge
I made it back from my annual pilgrimage to Baton Rouge where I shot my 11th Cajun Spring Classic field target match. I shot my first match there in April of 1995 and I have been back every year since. It is truly a first class event and one every field target shooter should experience at least once in their life. The club is a classic and one that I thoroughly enjoy every year.
This year my beautiful wife came along with me to celebrate our 2nd anniversary. We had a great time in Baton Rouge. Friday I went to the range to sight in and chit-chat and then in the afternoon Deb and I went into downtown Baton Rouge to check out some local sites. We visited the LSU campus as well, which was very pretty. We had a great dinner and wrapped up the day in the hotel hot tub. It was a fun and relaxing day all the way around.
Going to Baton Rouge, I was trying to decide if I was going to shoot Piston division or the Hunter division that they were offering for the first time. I have wanted to shoot Hunter style for a couple of years but each year I would decide to shoot my HW97 once I got there. This year I had my .177 ProSport pretty good and I thought that I might have a go at Hunter class for the first time. Well, after a while Friday morning I was leaning towards my HW97 again, it was so well and I was feeling so comfortable with it. I woke up Saturday morning resolved to shoot Hunter class.
I got to the range and began to notice that the ing handle on my ProSport would fall down from under the stock every time I would shoot it. The groups weren’t looking too good either, I was getting a lot of flyers. I talked to Paul Watts about it and he told me that I shouldn’t shoot the ProSport as this condition could be a problem with the seal on the compression chamber. He also mentioned that the front stock screws can sometimes be tightened down to the point where they hit a bushing inside the gun and that may cause an accuracy problem and possibly the ing lever problem. I thought at this point that I would have to shoot my HW97, but luckily Wade Sutherland had a backup TX200 that I could use and I went ahead and shot Hunter class.
Saturdays match was one of the most relaxed matches I have shot in a long time. I was with David Slade and Alan Otsuka (old friends) and we had a great time. I had about 5 minutes of sight-in time with the TX before we had to head into the woods so I was trying to get used to the gun as we went along. We were cutting up and having a lot of fun and that made a lot of my misses a lot easier to take. After about four lanes, I decided I had to re-adjust the trigger since it was a heavy single stage and I prefer a light two stage. After about three or four more lanes, I got it about right, but it was still a bit heavy. I managed to hit 32 targets out of 50, which I thought was pretty good considering my goal was to hit 50% or better. The most interesting thing during this match was that all three of us cleaned our last lane, which was the standing lane. It wasn’t an easy lane either but we all managed to get them all.
Saturday afternoon I had time to take a little nap before supper and I awoke from my nap with a start. I had a realization as I was waking up, my ProSport ing lever had just started acting up on Friday, it had to be a loose screw! I got the rifle out and removed the action from the stock and sure enough, the bolt that connects the ing arm linkage to the compression tube was loose. I tightened it up and also checked the bushing near the front stock screw. Sure enough, the screws were digging into the bushing. I decided to file down the aluminum bushing where the screw touched it. It appeared to me that the bushing was only used to stop the ing arm so I didn’t think it would hurt the operation of the rifle. Deb and I went out to eat with our friends Harold and Cindy Rushton and Donnie Ross who are TVA club members. We had a wonderful dinner and then we went to see the movie “Inside Man”. It was a good movie but boy there was a lot of unnecessary use of the F word.
Sunday morning practice time proved that my smithing work paid off. The rifle was right on target and grouping very well. I shot the Sunday match with my ProSport and did better. I shot with Richard Shimizu, another old friend, and we had a great time again. We only had the two of us in our squad so we had a lot of time to talk and fellowship with other airgunners. I ended up with a 37 and an overall total of 69 for the weekend. I was happy with that for my first time Hunter class at a major match.
One of the best parts of the Cajun Classics is after the match when we get to eat! Saturday we had Jambalaya and Sunday we had Shrimp Etouffee. Both were excellent.
After eating, we watched some shoot-offs and the awards. Boy, there was some excellent going on. Warren Williamson only dropped two shots all weekend and cleaned the Belle Terre course on Sunday to win the PCP division. Ray Appelles shot a 94 ½ with his TX200SR to win Piston division and Rod Bradley shot 80 with his .20 HW97 to win the Hunter class award. That was some good .
After all was done, those of us who were still around went out for Pizza at the Original Italian Pie. This was a lot of fun and I have done this in the past. It is a time where all of us shooters really relax and talk about the match, , equipment, and just about everything else. This night was no different. We had a great time of food and fellowship. This was one of the best Cajun’s I have been to and a lot of it was because my wife accompanied me and because I got to see my family and because I got to shoot! I am already looking forward to next year.
This year my beautiful wife came along with me to celebrate our 2nd anniversary. We had a great time in Baton Rouge. Friday I went to the range to sight in and chit-chat and then in the afternoon Deb and I went into downtown Baton Rouge to check out some local sites. We visited the LSU campus as well, which was very pretty. We had a great dinner and wrapped up the day in the hotel hot tub. It was a fun and relaxing day all the way around.
Going to Baton Rouge, I was trying to decide if I was going to shoot Piston division or the Hunter division that they were offering for the first time. I have wanted to shoot Hunter style for a couple of years but each year I would decide to shoot my HW97 once I got there. This year I had my .177 ProSport pretty good and I thought that I might have a go at Hunter class for the first time. Well, after a while Friday morning I was leaning towards my HW97 again, it was so well and I was feeling so comfortable with it. I woke up Saturday morning resolved to shoot Hunter class.
I got to the range and began to notice that the ing handle on my ProSport would fall down from under the stock every time I would shoot it. The groups weren’t looking too good either, I was getting a lot of flyers. I talked to Paul Watts about it and he told me that I shouldn’t shoot the ProSport as this condition could be a problem with the seal on the compression chamber. He also mentioned that the front stock screws can sometimes be tightened down to the point where they hit a bushing inside the gun and that may cause an accuracy problem and possibly the ing lever problem. I thought at this point that I would have to shoot my HW97, but luckily Wade Sutherland had a backup TX200 that I could use and I went ahead and shot Hunter class.
Saturdays match was one of the most relaxed matches I have shot in a long time. I was with David Slade and Alan Otsuka (old friends) and we had a great time. I had about 5 minutes of sight-in time with the TX before we had to head into the woods so I was trying to get used to the gun as we went along. We were cutting up and having a lot of fun and that made a lot of my misses a lot easier to take. After about four lanes, I decided I had to re-adjust the trigger since it was a heavy single stage and I prefer a light two stage. After about three or four more lanes, I got it about right, but it was still a bit heavy. I managed to hit 32 targets out of 50, which I thought was pretty good considering my goal was to hit 50% or better. The most interesting thing during this match was that all three of us cleaned our last lane, which was the standing lane. It wasn’t an easy lane either but we all managed to get them all.
Saturday afternoon I had time to take a little nap before supper and I awoke from my nap with a start. I had a realization as I was waking up, my ProSport ing lever had just started acting up on Friday, it had to be a loose screw! I got the rifle out and removed the action from the stock and sure enough, the bolt that connects the ing arm linkage to the compression tube was loose. I tightened it up and also checked the bushing near the front stock screw. Sure enough, the screws were digging into the bushing. I decided to file down the aluminum bushing where the screw touched it. It appeared to me that the bushing was only used to stop the ing arm so I didn’t think it would hurt the operation of the rifle. Deb and I went out to eat with our friends Harold and Cindy Rushton and Donnie Ross who are TVA club members. We had a wonderful dinner and then we went to see the movie “Inside Man”. It was a good movie but boy there was a lot of unnecessary use of the F word.
Sunday morning practice time proved that my smithing work paid off. The rifle was right on target and grouping very well. I shot the Sunday match with my ProSport and did better. I shot with Richard Shimizu, another old friend, and we had a great time again. We only had the two of us in our squad so we had a lot of time to talk and fellowship with other airgunners. I ended up with a 37 and an overall total of 69 for the weekend. I was happy with that for my first time Hunter class at a major match.
One of the best parts of the Cajun Classics is after the match when we get to eat! Saturday we had Jambalaya and Sunday we had Shrimp Etouffee. Both were excellent.
After eating, we watched some shoot-offs and the awards. Boy, there was some excellent going on. Warren Williamson only dropped two shots all weekend and cleaned the Belle Terre course on Sunday to win the PCP division. Ray Appelles shot a 94 ½ with his TX200SR to win Piston division and Rod Bradley shot 80 with his .20 HW97 to win the Hunter class award. That was some good .
After all was done, those of us who were still around went out for Pizza at the Original Italian Pie. This was a lot of fun and I have done this in the past. It is a time where all of us shooters really relax and talk about the match, , equipment, and just about everything else. This night was no different. We had a great time of food and fellowship. This was one of the best Cajun’s I have been to and a lot of it was because my wife accompanied me and because I got to see my family and because I got to shoot! I am already looking forward to next year.
Comments:
<< Home
Brad,
It looks like this blog software is censoring your articles! I see where the word shooting looks to have been deleted more than once and of course the cocking lever was sensitized to become an ing lever!
Sam
It looks like this blog software is censoring your articles! I see where the word shooting looks to have been deleted more than once and of course the cocking lever was sensitized to become an ing lever!
Sam
Brad,
Hunter sounds like a great time, kind of like unmarked 3-d archery.
What pellets are you using in your ProSport?
Hunter sounds like a great time, kind of like unmarked 3-d archery.
What pellets are you using in your ProSport?
When I look at the blog on my home and work computers the words "cocking" and "shooting" both show up correctly. Perhaps you have a filtering program running that is changing the words?
I use Crosman Premiers in all of my match rifles including my ProSport. However, the JSB Exacts shoot really well in them as well.
Post a Comment
<< Home